Design of sidewalk paths. What garden paths to make at your dacha or plot (35 photos). Decorating garden paths with flowers: borders and mixborders

Every person who has a country plot wants his dacha to be equipped and well-groomed.

The Internet is full of articles with various options improvement of summer cottages with photos of beautiful garden paths, but it’s not clear how to do it all yourself.

Designer services are quite expensive, but at the same time I would like your garden to be somehow different from others. Original garden paths will give any garden an original look.

DIY garden paths

Arranging a plot of land with garden paths will not require large financial expenditures, especially if the dacha has materials suitable for this.

You just need to use your imagination and carefully examine the contents of the attic and other places where suitable elements for making paths can be stored.

Exists great amount options for garden paths, the choice depends only on the taste and capabilities of the owner of the dacha.

How to make a garden path with your own hands

The easiest way is to make a gravel path. To make it, you will need:

Pebbles or expanded clay;
Geotexile or compacted film;
Sand;
Edges made of wood or concrete (sides) for paths.

First you need to think about the design of your garden paths. The path should be conveniently and harmoniously located.

To make a high-quality track, all steps must be performed step by step:

Make markings for your future path. If you plan to make it twisty, then draw all the twists.
Dig in wooden blocks or concrete sides on both sides.
The top layer of turf should be removed along the entire length of the path to a depth of approximately 15-20 cm.
Geotextiles or thick film are carefully laid along the path, the edges should be placed under the sides of the path.
The cleaned surface is covered with a 5 cm layer of sand. After which the sand is leveled.
The prepared surface is covered with gravel.
The gravel is compacted using a roller or a regular shovel.

Garden path made of natural stone

Natural stone is one of the best natural materials. It fits perfectly into its surroundings.

Stone paths are the most durable. This allows them to save appearance for many years. To make such tracks you will need:

Crushed cobblestone or rubble;
Some sand.

Garden paths made of natural stone

Marking the path is the first thing where work should begin.

You need to remove the turf from the entire area intended for the path. The depth depends on the size of the largest stone for the path.

Fill the area of the path with sand, and then begin leveling. The thickness of the sand layer should be about 10 cm.

The stones are laid out on the sand. It is necessary to press the cobblestones into the thickness of the sand.

You can leave gaps between the stones into which soil can be poured. Many people sow this land with small grass.

Note!

If the stone is not very large, then intervals of 2-3 cm will be sufficient. In the future, these seams can be sealed with cement mortar.

Concrete garden paths

In order to make a concrete garden path, you can use a garden path mold, which is a plastic frame. This is very convenient device, which greatly simplifies the entire process.

Materials required for a concrete walkway:

Sand;
Crushed stone or gravel;
Water,
Cement.

How to prepare a place for a concrete path?

This path is prepared in the same way as a gravel path. But the trench for it should be wider in comparison with the size of the finished path - about 20 cm.

Remove excess soil from the trench and compact the bottom.
To secure the formwork, use wooden pegs located along the length of the path on both sides.
Crushed stone 5-10 cm thick is poured into the bottom. These figures should not be exceeded.
To prevent the concrete from cracking in the future, the formwork is reinforced with slats. The slats are installed transversely every 2.5-3 meters.
Next, a form for concreting is placed on top.
The form must be filled with cement solution as evenly as possible, without leaving empty spaces.
After finishing one section of the trench, move on to the next, covering the finished gap with plastic film to prevent debris from getting on the fresh concrete.
After two weeks of waiting, the formwork must be removed.
The remaining areas between the slabs can be filled with soil or grass can be planted there.
Those spaces that remain from the trench on the sides are filled with pebbles or lined with bricks.

Wooden paths for the garden

Wood is the most readily available material for the construction of garden paths. The rich variety of colors and textures of wood allows you to give free rein to your imagination.

Note!

Wooden garden paths can be created from treated boards or from simple tree cuts. The methods of laying such paths are slightly different from each other.

Path made of stumps

Wood or hemp cuts can be used to create original paths for your garden. When making such tracks, follow the step-by-step instructions:

The material for laying a garden path must be treated with an antiseptic, since the tree does not tolerate contact with damp soil. Treating wood with 10% copper sulfate will increase the protective properties of wood. Bitumen is used for the same purposes. You can purchase material that has already been treated with an antiseptic.
Mark the area of the path and remove upper layer land.
Dig a trench 30 cm deep.
Place film or geotextiles along the entire path.
Cover the film with a ten centimeter layer of crushed stone.
A layer of sand is applied to the crushed stone, which must be moistened and compacted.
Now you can lay out the cuts. The remaining gaps between cuts can be filled with earth or gravel.

A path made from boards is prepared in the same way as a garden path from tree cuts, only the boards are laid vertically.

Whatever option you choose, it is important to carry out all work on the garden plot with good mood and inspiration.

After all, a dacha is a place to restore mental and physical strength. Every corner of its area should please the eye and inspire new ideas.

Note!

Photos of garden paths with your own hands

Why do homeowners choose to put a walkway design on their lawn in their patio? main reason— provide better access to hard-to-reach corners, create passages to flower beds. Landscaping path design - 65 photos of ideas on how to design paths to the house. The path will prevent damage to flowers, vegetables and other plants due to clearly defined edges.

Paths and walkway designs are also ideal for redirecting purposeful bare feet away from your manicured flowerbeds and beds. If the shortest route to your front door is straight through your well-kept front yard, then you'll definitely want a path to protect your yard from any damage.

Landscaping a walkway will add dynamics to your landscape, as well as create a calming, welcoming effect. When it comes to building a walkway, you have a wide range of options, both simple and complex. It all depends on your time, investment and effort that you are willing to put into it. Here are some possible options. Path design photo:

Path design - choosing material

Design of garden paths made of concrete slabs. Quite a simple approach. Purchase concrete slabs measuring about 45 centimeters in diameter. Place them directly on the ground along the path about two steps apart.

An interpretation of this method would be to make a small depression in the ground before laying out the stones. Dig holes so that the stone protrudes about 1.5 centimeters above the ground. This will allow you to easily mow the grass around the walkway, as well as trim the plants that inevitably grow over time.

Cobblestones and gravel for the design of site paths. A continuous path of pebbles or crushed stone. In this case, the need to trim the plants will simply go away. Also use cobblestones or gravel to complement your flagstones. Whatever option you choose, be sure to study the landscape layer before laying down cobble or gravel. This may affect water drainage (after rain, for example) or weed control.

Design of a path to a house made of mulch. Another solution is to design a walkway that is made entirely of mulch, or a combination of mulch and rocks. True, mulch tends to get a little dirty, especially on rainy days. But at the same time it is good and affordable. Garden paths photo design:

If you decide to use mulch, there are several ways to add an accent to your path. For example, finishing the edges with wood or plastic will give the path a more formal look. Any garden path design details that add a special touch to your paths and paths are easy to buy, inexpensive, and installed with just a hammer.

If your walkway is located on a slight slope, be sure to consider pine needles as an addition to the mulch. They stick together well. Therefore, during gusty winds, the mulch will better maintain its appearance.

Designing paths from pieces of bark is another great opportunity to add variety to your garden path. Today they are different colors: red, black, brown. Pieces of bark practically do not fade in the sun.

Landscaping path

The landscaping of the walkway is surrounded by plants and trees that provide beauty and protect privacy. They also help your pool blend seamlessly with its surroundings. Grow tall plants that will form protective screens and will definitely hide your privacy by the pool from prying eyes. But you need to choose your vegetation wisely. It is important to consider how large a particular plant will grow. It is also worth considering that big trees create shade and shed a lot of foliage! It is this factor that leads to water rotting. Garden paths photo design:

If your pool requires salt water, then take this factor into account. You will need to select plants that are salt tolerant. Ilex or juniper may work well. Trees on the south side of the pool are grown to create intoxicating, cool shade. But don't let the entire pool be in the shade. Then you will have room for sun on cloudy days.

Give up fruit trees near the paths, otherwise the design of the path to the house will suffer: not only because of leaf litter, but also because they attract bees. For the same reasons, you should avoid flowers near the pool. It is worth knowing that plants should be planted at least 2 meters away from the structure, this will make it much easier to keep the pool clean.
But an even more important criterion for choosing vegetation is their root system. Some trees can damage your pool with their roots over the years, and landscaping a walkway will help you move freely throughout your property.

An irrigation system is extremely critical to maintaining the appearance of your patio. in the best possible way. Correct management water resources is a balance between conserving water and providing vegetation with the amount it needs for healthy growth. Every homeowner should pay attention to the attractiveness of the landscape in his yard, and make sure that the appearance developed by the designers will not change.

Pathway design to the house

One of the most important elements for preserving the landscape and design of your patio garden paths is long years, is a well-functioning irrigation system. This especially applies to dry seasons. There are many types of irrigation systems. The most common are sprinkler, rotary and drip irrigation. Path design photo:

Spray system. The most popular form of irrigation for home lawns and gardens. Good for small patio areas. The heads easily rotate so that you can change the direction of the spray so that the garden paths photo design are not wet. Overall, the system is reliable with little maintenance.

Rotary system. Most often used to irrigate large areas, and usually found in stadiums. Rotary systems throw water up to 30 meters. Despite the rate at which water is released from the sprayer, rotary systems actually release less water than a sprinkler system.

Drip irrigation for landscape design paths. One of the most efficient water conservation irrigation systems. Drip irrigation has many advantages over other types of irrigation, including:

Drip irrigation systems use a network of tubes and hoses to distribute water slowly and efficiently under low pressure. It uses less water than traditional overhead irrigation, and in many cases this slow, steady flow of water provides more healthy care for vegetation. Path design photo:

Landscaping a personal plot is not as difficult as it seems at first glance. The least expensive idea would be to lay garden paths. This design will not only give an attractive appearance to the local area, but will also become a very functional addition. In rainy weather, you won’t have to walk on soggy ground; having a garden path will eliminate such inconveniences. Modern market offers a variety of materials for arranging a personal plot. You just need to make a choice based on your taste preferences and financial capabilities. In order to significantly save money, it is not necessary to turn to landscape designers for help, there is no need to look for a team of tilers. It is quite possible to lay garden paths yourself; you just need to know a few subtleties that you may encounter in the process of arranging your local area.

You can lay garden paths yourself

Garden paths are the most budget-friendly option for landscaping

Garden paths can harmoniously decorate a site

Paths designed using natural stone, always look impressive and original. The main advantages of natural material are ease of installation, heat resistance and long service life. The disadvantage is the high price of the coating, massiveness and the need to draw up a sketch before starting work. Natural stone is considered an elite material, and many developers prefer to practically not use it due to its high price. But in in this case The price fully justifies the quality. Stone garden paths will last for decades.

Natural stone is mined in quarries and then processed. This means that the material is environmentally friendly and comes in a variety of colors and sizes. Among the methods of paving paths, there are two main methods: by applying a coating to a sand cushion or by spreading the coating directly onto the concrete mixture.

These tracks can last a very long time.

Paths made of natural stone look very beautiful

Laying on a sand bed

It is necessary to dig a trench, the depth of which is determined by the characteristics of the soil. If the soil is light enough, the trench should be no more than half a meter, otherwise no more than 30 cm.
A layer of prepared crushed stone is distributed on the ground, no more than 12 cm.
A sand cushion must be laid on top of the crushed stone.
An ornament made of natural stone is formed on the sand.
If necessary, the seams are sealed with sand.
On last stage the entire surface is treated with water. You need to monitor the amount of moisture, this will help avoid sand being washed out of the joints.
Laying using concrete
As in the first case, a trench is dug and several layers of crushed stone and sand are laid.
The required amount of concrete is poured into the formwork.
You should wait until the solution dries and carefully remove the formwork.
Sand is poured and natural stone is laid on its surface.
The joints are rubbed with sand, after which the garden path is treated with water.

You can also lay tiles on a concrete base.

When treating with water, make sure that the sand is not washed away

The surface on which the tiles will be laid must be leveled

Clinker brick paving

Limitless imagination, a set of necessary equipment and a little patience - this is what you need when working with clinker. Material happens different forms, but the most common are rectangular and wedge-shaped. Clinker bricks began to be used two centuries ago and were used for paving roads and sidewalks. Later it began to be used to decorate gardens and summer cottages.

The hallmark of the material is not only its aesthetically attractive appearance, but also a number of functional advantages. Clinker bricks are made from clay using the full sintering method. This means that such paving will last for many years due to its resistance to extreme low temperatures and moisture. It does not crack, can withstand heavy weight, can be cleaned with a brush, detergent and water. In addition, the material does not deteriorate from exposure to salts, alkaline agents and other abrasive substances.

The material is very resistant and is not subject to bad influences

A path made from such material can serve you for many years.

How to work with clinker bricks

If you decide to decorate your garden in a country style, the material will fit perfectly into the overall picture. It is necessary to pay close attention to the paving method. A garden path with smooth curves will look impressive. At the same time, pay attention that the path does not consist of sharp turns, this will prevent material from being trampled along the inner corner. The process of working with coating is not complicated, but it has several nuances:

the site is marked to determine the zero line, the slope is made in the direction of convenient removal of excess moisture;
Pegs are placed in the corners of the site and a rope is stretched along them;
a second rope is fixed to one of the pegs and retracted 90 degrees;
boards are dug into the ground, a little away from the pegs, if necessary, an additional layer of soil is poured and compacted;
a solution consisting of cement and sand is prepared;
clinker brick is laid using a rubber hammer;
If necessary, fill the seams with additional mortar.

Consider the presence of a border. The border will look great from an aesthetic point of view and will help maintain the contours of the path, blocking the path of flowing moisture. It can be formed using bricks, carefully placing the material on the edges of the path or burying it in pre-dug small trenches.

Smooth curves will further decorate the overall picture.

The border will further decorate the path

This material fits perfectly into country style

Paving slabs

Paving slabs will last for many years, as long as they are laid correctly. Choosing a tile is not difficult at all, construction market There are many types of coating available, from color to size and pattern applied to the surface. You can easily install the material yourself, without the help of professionals. To save money, it makes sense to use the cheapest and simple techniques laying paving slabs. To work, you will need tools that every owner will probably have: a bayonet and shovel, a peg, a level, a rubber hammer, a rake, a device for leveling the soil, a brush with hard bristles.

To lay tiles yourself, you will need a standard set of tools.

For tiles to last for a long time, they need to be laid correctly.

How to lay paving slabs

Before starting work, it is necessary to remove everything unnecessary from the territory and remove excess grass. Then go to the site markings and think about the width of the paths and their directions. It is irrational to make wide garden paths. This is quite expensive and takes up a lot of space, which can be used for other needs.

To mark the boundary of the future surface, pegs are placed and a rope is pulled over them. This is done to give a smooth surface to the path. Depressions are dug in the ground. To determine the depth of the trench, you need to measure the thickness of the tiles. For example, if the material is 7 cm thick, then it is advisable to make a hole 10 cm in size in the ground. Next, according to the boundaries of the rope, the side is knocked out using a shovel. The tool must be held strictly vertically. After work on the sides is completed, you can begin to remove excess layers of soil inside. The next step will be to distribute the sand inside the resulting space, while ensuring the uniformity of the surface. You can correct flaws using a shovel. Now you can begin the most important task: laying paving slabs. It is necessary to check the quality of work using a level. The slope per 1 m of the path should be 1 cm. The resulting seams are rubbed with sand, treating the tiles with water.

Before installation, the area must be cleared of debris.

When laying tiles, you need to check the surface with a level.

Use of wood

The purpose of any garden path is purely utilitarian, but what if you show a little imagination and approach creatively the issue of arranging the territory. Wood is an environmentally friendly material with an aesthetically attractive appearance. Wooden paths will decorate any area and will look non-trivial and interesting. The material can be timber, boards, garden parquet or boards. But increasingly, cut wood is used to decorate a personal plot.

Before starting work, you need to make a choice between numerous types of wood. It all depends on how long you plan to use the track. Oak will last about ten years, pine will not lose its properties for 7 years. Larch can be considered the most durable species; it is the most durable and will last about 25 years. How more load will be placed on the path, the larger the wood blank should be in diameter. It is advisable to make them at least 15 cm in height. With such dimensions, the wood cut is firmly fixed in pre-prepared holes and will not fall out during operation.

IMPORTANT! It is necessary to discard saw cuts that have cracks. Before laying, it is recommended to clear the tree of bark, this will extend its service life.

The marking of the site is carried out as in the cases described above. For comfortable movement of one person, 60 cm of the path width will be quite enough. A waterproofing film is laid at the bottom of the trench. If you don’t have it at hand, you can use regular plastic film. The next step will be to distribute the required amount of crushed stone on the prepared surface. Crushed stone acts as drainage and protects the wood from unwanted moisture. The sand is distributed in an even layer, after which you can begin laying the cut. The distance should be minimal. The gaps between the workpieces are filled with sand, and the material is watered with a small amount of water to compact it. You can decorate the path different ways. For example, paint the cut, sow the gaps with grass or decorate with pebbles. Remember, wood is susceptible negative influence environment, so before laying it is better to cover it special compounds preventing it from rotting.

You can make a wooden path yourself

Wooden paths will decorate any area and will look non-trivial and interesting

Concrete path in the garden

Each method of laying a garden path has pros and cons. Concrete path is no exception. Thousands of owners of individual housing choose this method of decorating their local area. Concrete is a durable material that can last for decades if used properly. The design is quite easy to create without the help of professionals. And besides, a concrete path is a great way to save money; the material is relatively inexpensive. Concrete can withstand significant mechanical loads without any problems, and installation does not take much time. But, like everywhere else, it also has its downsides. During the off-season, the material often cracks. This is due to ground movement in rainy weather. It is unlikely that it will be possible to change the location of the path in the future; the structure is capital. Therefore, it is better to take your time and think carefully about the directions of the paths and their width.

The process of laying a concrete path with your own hands must begin with the installation of formwork. It is better to use boards for this. If you plan to add some bends to the structure, use any plastic materials. Plywood is a great option. Please note that concrete must be poured in parts in any case. This is done to compensate for expansion or contraction of the material due to temperature changes. Therefore, there is no point in making continuous formwork for the entire area. You can lay it partially, thus significantly saving materials for the structure. Professionals recommend forming the pillow from a mixture of compacted crushed stone and sand. It makes sense to think about waterproofing. Geotextiles or roofing felt will serve for these purposes. The next stage is pouring concrete. The solution is mixed from cement and sand in a ratio of 1 to 3. The preferred concrete thickness should be at least 5 cm. The resulting layer is leveled using a spatula. After moisture appears on the surface, all surface irregularities can be removed and the concrete is wetted with water.

A concrete path is the cheapest and easiest option.

You can create such a track without the help of professionals.

Concrete is a very durable material and can last for decades

Plastic modules

The use of plastic modules in laying garden paths is a new technology that has managed to win thousands of fans all over the world. Plastic is a material that is quite light, cheap, durable and strong. The advantage is that the plastic modules can be dismantled at any time. They are not exposed to negative environmental influences and do not enter into chemical reactions. It is in this case that you can choose any option, because there is a huge amount of plastic on the market various forms and colors. The tile includes a backing and an outer part. The substrate is designed for air ventilation and drainage of excess moisture. Before installation, it is necessary to level the surface on which you plan to lay the material. It is better to lay additional drainage on the soil. Crushed stone can be used as drainage. The installation itself is quite simple and is carried out using a locking fastening. This is how the parts of the tiles are connected to each other.

Plastic modules are not very expensive and easy to install

The lawn grate does not require special preparatory work

Using the form

Today you can make paths with your own hands without much effort. There are dozens of technologies in the world that make life easier for private home owners. One of the fastest technologies can rightfully be considered the use of special plastic molds. Everything is quite simple: cement is poured into the mold and left until it dries completely. For comfortable work, you need to acquire several samples; 2 or 3 forms will be quite enough.

Before laying the tiles, it is necessary to excavate the soil. The first layer is filled with sand to a depth of about 10-15 cm, then crushed stone (7-10 cm) is distributed, finish preparatory work it is necessary to distribute another layer of sand. After this, the sand is compacted and you can begin laying the tiles made using molds. It is recommended to fill the resulting cracks with sand, and then moisten the entire structure with a small amount of water.

Video: DIY garden path

50 photos of ideas for creating garden paths with your own hands:

Stylish and comfortable paths in the garden with your own hands

Paths are an integral part of the garden. Not only the appearance of the estate, but also the ease of movement throughout the entire site depends on how they are laid and connected to each other. Therefore, the arrangement of paths and paths is the main stage in the design of a garden and park area.

How to Plan a Path Layout

It is best to draw up a layout of paths during planning and zoning of the site. This will make it possible to provide access to all necessary buildings and areas.

If necessary in the future, after the appearance of a new building, or a change in the layout, you can always adjust the route or change the direction. Marking should be carried out taking into account all routes, so that each important element the garden was provided with convenient passage.

First, you should draw up a site plan and think through all possible objects, including communication, architectural or design ones. After marking all the routes, it is necessary to determine the width of the path, taking into account what exactly it will be used for.

The main path - going from the gate to the house and to the most visited places, for example, a gazebo or playground, should be 0.9-1.5 m wide. This is necessary not only to allow two people to pass through, but will also help to highlight it visually.
Paths of secondary importance (to utility rooms, bathhouse, outbuildings, recreation areas) - from 60 to 90 cm.
For paths going deep into the garden or vegetable garden, a width of 35-50 cm is suitable.

The exact width of the paths is not given, as it depends on the size of the area and personal preference. However, for a large area, it is recommended to make each branch from the road twice as narrow as the previous one. For example, the main one is 1.2 m, then the secondary one is 60 cm, and the garden one is 30-35.

It is equally important that the paths fit perfectly into the overall style of the site. For a garden designed in a landscape style, serpentine paths with smooth turns are best suited. Their width is made the same, and when approaching sites or buildings they are gradually expanded.

Landscape style of garden design or English garden. Also called the Natural Style or Natural Garden, it contains irregular and uneven shapes, mixed plantings and planting areas.

In a regularly constructed garden, paths are laid out exclusively in a straight line, so that they are parallel and perpendicular to each other, fences and walls of the house. A radial pattern or symmetry is also suitable for this style.

For the reader's reference

Landscape style A regular garden is the direct opposite of the landscape style. May also have names French park, Geometric garden, Garden of regular or geometric construction. It is distinguished by regular, even shapes and symmetrical execution. It is considered the most strict and light style in landscape design.

Materials for paving paths in the garden

When choosing which paths to make in the garden with your own hands, it is important to take into account the basic requirements: strength, safety and affordability. What is the best way to make them? And how to determine the required amount of materials?

The most popular are:

paving slabs;
a natural stone;
granite chips;
paving stones;
pebbles;
stamped concrete;
concrete plates;
bars and tree cuts;
terrace board.

The choice of building materials for paving should depend on the purpose of the paths and areas. On the main routes, especially if the house is permanently inhabited, a continuous hard covering of concrete, tile or stone is laid. For backfilling central paths, as well as for paving routes of secondary importance, brick chips, gravel or pebbles are used.

The central paths and entrances are paved with the same type of material to give the entire space stylistic unity. If the area of the site is large, you can combine several types of coatings, but no more than 2-3. To lay serpentine paths, it is better to choose small-sized elements - paving stones, clinker, paving slabs.

Before laying the covering, it is necessary to make the base of the path. To do this, dig a trench, having previously calculated its depth using the formula: the height of the base layer plus the height of the surface coating. Typically, a 30 centimeter layer of fine-grained sand and gravel, or crushed stone, is used to create the base. In this case, the sand component should not be more than 50%. The base is laid out in 4-5 approximately equal layers, each one is thoroughly poured with water to settle and compacted.

Determining the amount of facing material

In order to determine how much material will be required for paving the surface layer of the path, it is necessary to determine the length and width of the future garden path, and then, by multiplication, calculate it total area. For example, to create a path measuring 1.2 by 7 m, about 63 tons of decorative crushed stone will be required.

This calculation is made based on the following data:

Using the data from the example, we obtain the coverage area: 1.2*7=8.4 square meters;
For a stable coating, according to the standards, it is customary to take a height of 5 cm;
Coverage volume equal to area coverage multiplied by height: 8.4*5=42 cubic meters;
The bulk weight of decorative crushed stone can be obtained from the manufacturer; on average, it is one and a half tons per cubic meter;
Based on these data, we calculate that our path will need 63 tons (42 * 1.5).

You can approximately calculate the amount of sand and gravel for the base using the same principle. The bulk weight of fine-grained sand is 1.72-1.8 tons per cubic meter, and the bulk weight of fine-grained crushed stone M700-M800 is 1.41 tons.

Paths in the garden made of stone, tiles and bricks: design options

Slab is the most popular material for organizing paths. Firstly, it is easy to lay out, secondly, it is durable and wear-resistant, and thirdly, it is quite easy to care for.

The modern building materials market allows you to choose paving slabs to suit every taste - all kinds of shapes, colors and textures. To decorate the area large sizes- a parking lot or a platform near the porch, it is enough to combine 2-3 options, organizing inserts on the main canvas with diagonal or patterned placement of tiles.

Mosaics or abstract patterns made from multi-colored tiles of various sizes will look very unusual and festive. For connoisseurs of natural style, an excellent solution would be tiles with gaps, which after installation can be sowed with grass or covered with soil.

DIY garden paths made of natural stone

Natural materials - basalt, granite, limestone, sandstone allow you to turn your wildest fantasies into reality. With their help, you can make a path for any purpose a real artistic element of the garden. The main advantage of such a coating is harmony and durability. Pavement of paths from natural stone is not difficult, even for a non-professional.

For the construction of walking paths, it is most rational to use full-sawn paving stones - stone blocks shaped like a parallelepiped. And driveways should be paved with crushed paving stones. Paving made of flagstone of irregular shape, 4 cm thick, looks no less beautiful. It must be selected according to its shape, and laid on a bed of compacted sand or on a sand-cement mixture.

To save money

To save money, you can combine paving slabs, filling the main part of the paving with them, and make stone patterns in the center. For this purpose, stones of any size left over from construction, boulders of unusual shapes, pebbles and shells brought from a trip are suitable. Brick chips, pieces of marble, granite, and even wood cuts will also come in handy.

Droshky in the garden, photo of original coverings using wood

Wood is not the most durable material, but wooden paths look very aesthetically pleasing and original. To ensure that the coating lasts as long as possible, before installation it is treated with special impregnations that protect against moisture and fungi: Drevotex-Anti-Mold, Dali, Woodmaster Prof Biosept, Ecodom Bioprof. Such paths are installed only in elevated places, where there is no possibility of waterlogging and water stagnation.

Walking paths going into the distance of the garden are made from wooden cuts with a diameter of 20 cm or rectangular beams 20x15 cm. The most suitable material for saw cuts is considered to be aspen, oak or alder wood, and for making beams - spruce, pine and some types of larch. The finished beams are laid out on a sand bed covered with gravel on top. The saw cuts are driven into compacted wet sand, as close to each other as possible.

The most durable material for garden paths

Paths made from decking boards are stronger and more durable. It is made from wood or wood-polymer material that is not subject to the destructive effects of weather conditions. Mount the covering on logs laid on a leveled surface. The boards are fastened to each other using self-tapping screws or clips.

The logs are selected based on the selected decking board. If wood-polymer materials are used, the logs should also be made of composite materials, since the service life of the parts of the structure must be the same. The surface for the logs can be made of various materials: paving stones, crushed stone and sand, sand cement or concrete. The main condition is a prepared, flat surface, with a slight slope (1.5-2%) from the house for water drainage.

The logs are laid at a distance of 40-50 cm, and in places of high load 20-30 cm. Also, they should not be laid close to curbs and walls, the recommended distance is more than 20 mm. After which the decking board is fixed. If completely natural materials are used, mandatory treatment with special oils to prevent rotting is necessary.

Bottom line

A beautifully laid out central path or an originally decorated winding path leading from the house to your favorite vacation spot, pond or vegetable garden can not only emphasize the advantages of plant compositions, but also become an effective garden decoration. Using the advice of our experts, you will make beautiful and comfortable paths in the garden with your own hands.

It is called creeping hop, beer hop, climbing hop, bitter... This powerful and beautiful vine has everything to be useful to a person. Hops is revered by many peoples of the world; it is a symbol of fertility, strong economy, prowess, happiness and longevity; it is depicted on coats of arms and coins. But many summer residents are not at all happy with him. Hops tend to grow rapidly, suppressing the growth of cultivated plants around them. But is it really necessary to fight it?

Pork with eggplant - a delicious stew with vegetables and spicy rice, easy and simple to prepare for dinner or lunch. It will take about half an hour to prepare, so this recipe can be classified as “if you need dinner quickly.” The dish turns out nourishing, aromatic, piquant. Turmeric gives the ingredients a beautiful golden-yellow color, while cloves, cardamom, garlic and chili add a piquant touch to the dish. For this recipe, choose lean meat.

Seed propagation in the garden strawberries we are used to, unfortunately, leads to the appearance of less productive plants and weaker bushes. But another type of these sweet berries, alpine strawberries, can be successfully grown from seeds. Let's learn about the main advantages and disadvantages of this crop, consider the main varieties and features of agricultural technology. The information presented in this article will help you decide whether it is worth allocating a place for it in the berry garden.

Despite the confusion with the name “Christmas cactus” that has accumulated over the past decades, one of the most recognizable and colorful forest cacti, epiphyllums, remains everyone’s favorites. Leafless, with flattened stems, flowering amazingly profusely, hybrid epiphyllums with their hanging shoots and delicate flowers do not require particularly complex care from their owners. They can become the most striking flowering succulent plant in any collection.

Merchant style buckwheat with meat and pumpkin - simple recipe delicious dinner or lunch. I recommend finishing it in the oven, although you can also cook it on the stove. Firstly, it tastes better in the oven, as the buckwheat steams, becomes very tasty, and the meat turns out tender. Secondly, the hour that it languishes in the oven can be spent on yourself or communicating with loved ones. Perhaps many will decide that buckwheat with meat is an ordinary dish, but try cooking it according to this recipe.

Often at the sight beautiful flower we instinctively lean in to smell its fragrance. All fragrant flowers can be divided into two large groups: nocturnal (pollinated by moths) and daytime, whose pollinators are mainly bees. Both groups of plants are important for the florist and designer, because we often walk around the garden during the day and relax in our favorite corners when evening comes. We are never overwhelmed by the scent of our favorite fragrant flowers.

Many gardeners consider pumpkin to be the queen of garden beds. And not only because of its size, variety of shapes and colors, but also for its excellent taste, useful qualities and a rich harvest. Pumpkin contains a large amount of carotene, iron, various vitamins and minerals. Thanks to the opportunity long-term storage this vegetable supports our health all year round. If you decide to plant a pumpkin on your plot, you will be interested in learning how to get the largest possible harvest.

Scotch eggs - incredibly delicious! Try to prepare this dish at home, there is nothing difficult in preparation. Scotch eggs are a hard-boiled egg wrapped in minced meat, breaded in flour, egg and breadcrumbs and deep-fried. For frying, you will need a frying pan with a high side, and if you have a deep fryer, then that’s just great - even less hassle. You will also need oil for frying so as not to smoke in the kitchen. Choose farm eggs for this recipe.

One of the most amazing large-flowered tubs of Dominican Cubanola fully justifies its status as a tropical miracle. Warm-loving, slow-growing, with huge and in many ways unique bells of flowers, Cubanola is a fragrant star with a complex character. She demands special conditions contents in the rooms. But for those who are looking for exclusive plants for their interior, a better (and more chocolatey) candidate for the role of indoor giant cannot be found.

Chickpea curry with meat is a hearty hot dish for lunch or dinner, inspired by Indian cuisine. This curry is quick to prepare but requires some prep. The chickpeas must first be soaked in large quantities cold water for several hours, preferably overnight, the water can be changed several times. It is also better to leave the meat in the marinade overnight so that it turns out juicy and tender. Then you should boil the chickpeas until tender and then prepare the curry according to the recipe.

Rhubarb cannot be found in every garden plot. It's a pity. This plant is a storehouse of vitamins and can be widely used in cooking. What is not prepared from rhubarb: soups and cabbage soup, salads, delicious jam, kvass, compotes and juices, candied fruits and marmalade, and even wine. But that's not all! The large green or red rosette of leaves of the plant, reminiscent of burdock, acts as a beautiful background for annuals. It is not surprising that rhubarb can also be seen in flower beds.

Today, the trend is to experiment with unusual combinations and non-standard colors in the garden. For example, plants with black inflorescences have become very fashionable. All black flowers are original and specific, and it is important to be able to select them suitable partners and location. Therefore, this article will not only introduce you to an assortment of plants with slate-black inflorescences, but will also teach you the intricacies of using such mystical plants in garden design.

3 delicious sandwiches - a cucumber sandwich, a chicken sandwich, a cabbage and meat sandwich - a great idea for a quick snack or for an outdoor picnic. Only fresh vegetables, juicy chicken and cream cheese and some seasonings. There are no onions in these sandwiches; if you wish, you can add onions marinated in balsamic vinegar to any of the sandwiches; this will not spoil the taste. Having quickly prepared snacks, all that remains is to pack a picnic basket and head to the nearest green lawn.

Depending on the varietal group, the age of seedlings suitable for planting in open ground, is: for early tomatoes - 45-50 days, average ripening periods - 55-60 and late dates- at least 70 days. When planting tomato seedlings in more at a young age the period of its adaptation to new conditions is significantly extended. But success in obtaining a high-quality tomato harvest also depends on carefully following the basic rules for planting seedlings in open ground.