Factory settings nokia lumia. Resetting settings on Lumia smartphones. Do I need a password to reset windows phone?

If you forgot your Samsung password, Don't worry; you can recover the passcode using your gmail account, or like the last ditch attempt, using a factory reset. Perhaps this article will help you: What if I forgot my password?

Use hard reset like last method which will only be executed if you are 100% sure that you don't have a Gmail account associated with your phone.

There are several variations of the factory password; each smartphone has its own. If you know any more, write it in the comments.

The default factory password is 00000000 (8 zeros). Also 1234, 12345, 0000, 00000. If not one is suitable, you can reset it. Attention, all data will be lost!(Except for those on the SD card, if you remove it). To do this, you need to remove the SIM card and then enter: *2767*8451# (on some models *2767*3855#) the password will most likely be reset to 8 zeros.

How to recover a forgotten password via Gmail?

This method will only work if you have connected your account Gmail entry to a Samsung phone.

1) Read the pop-up warning. Entering the wrong password five times on the unlock screen will trigger a pop-up warning. The system will be prompted for 30 seconds. Click OK.

2) State what you forgot. Direct your gaze to the options displayed at the bottom of the screen. Click “Forgot Pattern”, “Forgot PIN” or “Forgot Password”. Depending on which unlocking method you used to secure your Samsung phone.

3) Log in to your Gmail account. You need to send your Gmail ID information associated with your Samsung phone. Enter your Gmail username and password in the text field that appears and click the Login button.

4) Reset your password. After sending correct name Gmail user and password, you will be prompted to reset your Samsung password. Create a new password and click OK or Continue. Re-enter your new Samsung password and click OK. This should allow you to access your Samsung phone or tablet again.

How to Hard Reset Samsung Password?

To remove Samsung password, first turn off your phone. Just press and hold the Power button for a few seconds. Before performing a Factory Reset, be aware that this will cause you to lose all data on Samsung phone. You see, Factory Reset is basically a restore software, and will return your gadget back to its original system state, deleting all files saved on it.

Some good news: Factory Reset will not delete data stored on your SIM card or Micro SD card. This method does not actually recover your password, but it deletes all user data, including any set passwords or security patterns, on the device storage so that you can access your Samsung password again.

The volume buttons are on the left side of the phone, the power button is on the right, and the home button is at the very center of the bottom of the screen.

1) Turn off your phone. The normal way of pressing the power button will not work. Instead, hold and press these buttons at the same time: Volume Up or Down + Power + Home.

2) Whether you press Volume Up or Volume Down depends on the Samsung tab you are using. Try trial and error with both buttons.

3) Select to perform a factory reset. In the previous step, a welcome screen will appear in which you can select the option “Wipe data/Factory reset” using Volume keys. Confirm your choice using the Power button.

4) The option can also be presented as "Yes, delete all user data". Simply use the Volume keys to select an option and the Power button to confirm it.

Give the system a minute or two to complete the process.

Select "Reboot system now". It will appear on your screen. Confirm system reboot using the Power button. Wait a couple of minutes for the process to complete, after which you can use the password again. If none of the methods listed above helped you, see: How to restore to factory settings?

How to Unlock Samsung Password Using Find My Mobile?

If you are unable to unlock your Samsung password, first of all, don't panic. Tons of people have been in the same position before, and many more will follow in the future. That's why Samsung (and Android itself) have made it extremely easy to reset your password and regain access to your phone.

1) To unlock your phone using the platform Samsung Find My Mobile, go to the official website by clicking.

2) Login using the Samsung account you created when you first purchased your smartphone. Of course, this requires you to sign in to your Samsung account and not skip it.

3) On the toolbar, click the button Unlock device."

4) Make sure your phone is turned on and connected to the Internet via Wi-Fi or active connection for data transfer.

5) Click " OK" for a popup that is displayed on a website.

Your phone will now communicate with Find My Mobile and should unlock remotely within a few minutes. Now you'll want to log in settings device and create a new password.

If you encounter any problems during the process, be sure to let us know in the comment section below and we will do our best to help you.

Let's look at how to reset your Nokia Lumia 920 to factory settings.

This article is not a guide to action. All responsibility for the service of your device lies with you.

Hard reset

If your phone experiences a hardware failure, it is recommended to first perform a hard reset to factory settings. This does not erase the settings account Windows Live ID and user data.
Since this phone model does not allow the user to remove the battery independently, it has a special electronic circuit that turns off the power to the phone when certain buttons are pressed.

To perform a hard reset, press and hold the Volume Down and Power buttons for 5 seconds. The phone screen will turn black (the phone will turn off). Then press the phone's power button.

Soft reset/
Soft reset via operating system returns the phone to the state it was just purchased.

ATTENTION! When performing this procedure, all user data will be erased!
The first thing you should always do is try a hard reset.

Option 1: via menu

This option can be used if you know the lock code.

  • Select Menu > Settings > About product > Restore default settings (Settings > About > reset your phone)
  • Then you will need to enter the lock code.

Option 2: via secret button combination

This option can be used if the phone is locked and you do not know the lock code.

Step 1
Make sure your phone is turned off. Press and hold the Volume Down and Power buttons until an exclamation mark appears on your phone screen.

Step 2

Use the following button combination:
1. volume up button
2. volume down button
3. power button
4. volume down button

Step 3

The phone's settings will be reset and it will turn on automatically.

Sometimes it happens that the phone bricks or freezes (gears spin) on long time. To get the phone out of this state, you can reflash it according to the instructions “”, or take it to the official service center Nokia, where they should reflash it for you free of charge.

Sooner or later, each of us has to do reset settings in Nokia Lumia. Moreover, there are many reasons for this action. However, most often, it is done in order to clear the smartphone’s memory.

Unfortunately, over time, a lot of garbage accumulates on our beloved phone, which is stored in the device’s memory. And, alas, it cannot be deleted by pressing some special button, since it simply does not exist.

Many owners of WP smartphones are faced with a problem when, when installing a game or some application, they see a message on the phone screen that says that there is no space on the device to install the application. What to do in this case? The answer is quite simple, you need to know how to delete everything in Nokia Lumia, that is, how to reset to factory settings on Windows Phone. And now I will try to tell you step by step and show how to do this.

If your phone's memory stores information or content that is important to you (photos, documents, music, videos), you should copy it all to your computer. After all, after the reset, everything that is on the phone is deleted without the possibility of recovery (nothing is deleted from the flash drive!). Connected your phone to your computer and transferred everything you need? - Great! Now you can start cleaning.

Go to the phone settings, where you need to find the “device information” item.

At this point you will see a “reset settings” button.

After clicking, a warning will appear on the gadget screen that all personal content will be deleted. Click “yes”.

Then the process of deleting everything that is on the smartphone will begin. Naturally, this may take some time.

After a successful wipe, your Lumiya will return to its original settings and will reboot. Well, then, then everything is as it was from the very beginning, when you first purchased your smartphone. More precisely, not entirely, because you already have a Microsoft account. Enter your username and password and download everything you need from the store.

By the way, you don’t have to worry about your phone book (contacts), because they are all stored in your account. In other words, after authorization, all those numbers that were recorded in the phone will reappear in contacts.

Now you know how to clear memory in Nokia Lumia. Right now you can download new applications and toys to your irreplaceable smartphone.

Sep 17, 2014 mRelby

This article talks about what troubles the owner of a modern smartphone can get into, especially if he neglects to read the passport for its operation. It will be described in detail how to reset your smartphone to factory settings, features of the reset procedure and possible consequences such an operation.

No matter how cool your mobile phone is, communicating with it without knowing the technical intricacies is not always so simple and pleasant. For example, if an irresponsible user forgot the password or entered it incorrectly, then the phone ceases to be a joy-giving modern device, but turns into a source of frightening problems. As a result, the owner is desperately looking for ways to bring his fashionable smartphone back to life.

It happens that the Lumia 625 is very buggy or the owner of the phone tries in vain to remove the password. Such problems can cause great psychological and everyday discomfort.

The only way that can help revive a phone that freezes or does not turn on is to try to return to the settings that were installed on the phone at the time of its manufacture (resetting the settings to factory settings). How to reset?

If the password on the device cannot be unambiguously unlocked, and multiple attempts to enter the pattern key also do not lead to the desired result, then you can completely reset the settings using just one hardreset procedure.

Smartphone developers specifically came up with this manipulation to update all programs installed on the device. Hard reset The Nokia Lumia 625 knocks everything down to the factory default state. After the reset, the phone’s performance improves, the brakes disappear, and all technical tasks assigned to it are solved more efficiently. Does the average user need anything else? Yes, you need to know how to carry out this resuscitation procedure. For this purpose, the relevant information is provided below.

The most important thing, as always, is not to make things worse in any situation. All that is required is a minimum of initiative. Next, you need reset instructions for a specific phone model. If you do not act according to the instructions, you can damage the multifunctional and technically delicate device.

Let us immediately note that all data from memory must first be saved, thus carrying out backup. You need to be careful and not neglect this advice, the reset operation could potentially lead to the loss of all data on the phone.

How to reset Nokia lumia 625

First way
Select the following options in order: settings, device status information, reset settings. Next, you need to wait until the installation process is completed.

Second way
- turn off your device using the appropriate button;
- hold down the “Power” and “Volume Down” buttons until the vibration alert function works. Then the “Power” button can be released, and the second key must remain pressed until an exclamation mark is displayed on the screen;

Loading...Loading...