It's safe to say that everyone has dreamed of taking a closer look at the stars. You can use binoculars or a spotting scope to admire the bright night sky, but you are unlikely to be able to see anything in detail through these devices. Here you will need more serious equipment - a telescope. To have such a miracle of optical technology at home, you need to pay a large sum, which not all lovers of beauty can afford. But don't despair. You can make a telescope with your own hands, and for this, no matter how absurd it may sound, you don’t have to be a great astronomer and designer. If only there was a desire and an irresistible craving for the unknown.
Why should you try making a telescope?
We can definitely say that astronomy is a very complex science. And it requires a lot of effort from the person doing it. A situation may occur that you purchase an expensive telescope, and the science of the Universe will disappoint you, or you simply realize that this is not your thing at all.
In order to figure out what’s what, it’s enough to make a telescope for an amateur. Observing the sky through such a device will allow you to see many times more than through binoculars, and you will also be able to figure out whether this activity is interesting to you. If you are passionate about studying the night sky, then, of course, you cannot do without a professional apparatus.
What can you see with a homemade telescope?
Descriptions of how to make a telescope can be found in many textbooks and books. Such a device will allow you to clearly see the lunar craters. With it you can see Jupiter and even make out its four main satellites. The rings of Saturn, familiar to us from the pages of textbooks, can also be seen using a telescope made by ourselves. In addition, many more celestial bodies can be seen with your own eyes, for example, Venus, a large number of stars, clusters, nebulae.
A little about the telescope design
The main parts of our unit are its lens and eyepiece. With the help of the first part, the light emitted by celestial bodies is collected. How distant bodies can be seen, as well as what the magnification of the device will be, depends on the diameter of the lens. The second member of the tandem, the eyepiece, is designed to enlarge the resulting image so that our eye can admire the beauty of the stars.
Now about the two most common types optical devices- refractors and reflectors. The first type has a lens made of a lens system, and the second has a mirror lens. Lenses for a telescope, unlike a reflector mirror, can be found quite easily in specialized stores. Buying a mirror for a reflector will not be cheap, and making one yourself will be impossible for many. Therefore, as has already become clear, we will be assembling a refractor, and not a reflecting telescope. Let's finish the theoretical excursion with the concept of telescope magnification. It is equal to the ratio of the focal lengths of the lens and eyepiece.
How to make a telescope? We select materials
In order to start assembling the device, you need to stock up on a 1-diopter lens or its blank. By the way, such a lens will have a focal length of one meter. The diameter of the blanks will be about seventy millimeters. It should also be noted that it is better not to choose spectacle lenses for a telescope, since they generally have a concave-convex shape and are poorly suited for a telescope, although if you have them on hand, you can use them. It is recommended to use long focal length lenses biconvex shape.
As an eyepiece, you can take a regular magnifying glass with a thirty-millimeter diameter. If it is possible to get an eyepiece from the microscope, then it is certainly worth taking advantage of. It is also perfect for a telescope.
What should we make the housing for our future optical assistant from? Two pipes of different diameters made of cardboard or thick paper are perfect. One (the shorter one) will be inserted into the second, with a larger diameter and longer. A pipe with a smaller diameter should be made twenty centimeters long - this will ultimately be the eyepiece unit, and it is recommended to make the main one a meter long. If you don’t have the necessary blanks at hand, it doesn’t matter, the body can be made from an unnecessary roll of wallpaper. To do this, the wallpaper is wound in several layers to create the required thickness and rigidity and glued. How to make the diameter of the inner tube depends on what kind of lens we use.
Telescope stand
Very important point in creating your own telescope - preparing a special stand for it. Without it, it will be almost impossible to use it. There is an option to install the telescope on a camera tripod, which is equipped with a moving head, as well as fasteners that will allow you to fix different positions of the body.
Telescope assembly
The lens for the lens is fixed in a small tube with its convex outward. It is recommended to fasten it using a frame, which is a ring similar in diameter to the lens itself. Directly behind the lens, further along the pipe, it is necessary to equip a diaphragm in the form of a disk with a thirty-millimeter hole exactly in the middle. The purpose of the aperture is to eliminate image distortion caused by the use of a single lens. Also, installing it will affect the reduction of light that the lens receives. The telescope lens itself is mounted near the main tube.
Naturally, the eyepiece assembly cannot do without the eyepiece itself. First you need to prepare fastenings for it. They are made in the form of a cardboard cylinder and are similar in diameter to an eyepiece. The fastening is installed inside the pipe using two disks. They are the same diameter as the cylinder and have holes in the middle.
Setting up the device at home
The image must be focused using the distance from the lens to the eyepiece. To do this, the eyepiece assembly moves in the main tube. Since the pipes must be well pressed together, the required position will be securely fixed. The setup process is convenient to carry out on large bright bodies, for example, for the Moon, the neighboring house will also suit. When assembling, it is very important to ensure that the lens and eyepiece are parallel and their centers are on the same straight line.
Another way to make a telescope with your own hands is to change the size of the aperture. By varying its diameter, you can achieve the optimal picture. Using optical lenses of 0.6 diopters, which have a focal length of approximately two meters, you can increase the aperture and make the zoom much closer on our telescope, but you should understand that the body will also increase.
Watch out - Sun!
By the standards of the Universe, our Sun is far from the brightest star. However, for us it is very important source life. Naturally, having a telescope at their disposal, many will want to take a closer look at it. But you need to know that this is very dangerous. After all sunlight, passing through the optical systems we have built, can focus to such an extent that it will be able to burn through even thick paper. What can we say about the delicate retina of our eyes?
Therefore, you need to remember a very important rule: you cannot look at the Sun through zooming devices, especially through a home telescope, without special means protection. Such means are considered to be light filters and a method of projecting an image onto a screen.
What if you couldn’t assemble a telescope with your own hands, but you really want to look at the stars?
If suddenly for some reason the assembly homemade telescope is impossible, then do not despair. You can find a telescope in a store for a reasonable price. The question immediately arises: “Where are they sold?” Such equipment can be found in specialized astro-device stores. If there is nothing like this in your city, then you should visit a photographic equipment store or find another store that sells telescopes.
If you are lucky, there is a special shop, and even with professional consultants, then you are definitely in the right place. Before going, it is recommended to look at an overview of telescopes. First, you will understand the characteristics of optical devices. Secondly, it will be more difficult to deceive you and slip you a low-quality product. Then you will definitely not be disappointed in your purchase.
A few words about buying a telescope through the World Wide Web. This type of shopping is becoming very popular nowadays, and it is possible that you will use it. It’s very convenient: you look for the device you need, and then order it. However, you may come across the following nuisance: after a long selection, it may turn out that the product is no longer in stock. A much more unpleasant problem is the delivery of goods. It is no secret that a telescope is a very fragile thing, so only fragments can be delivered to you.
It is possible to purchase a telescope by hand. This option will allow you to save a lot of money, but you should be well prepared so as not to buy a broken item. A good place to find a potential seller is astronomer forums.
Price per telescope
Let's look at some price categories:
About five thousand rubles. Such a device will correspond to the characteristics of a telescope made with your own hands at home.
Up to ten thousand rubles. This device will certainly be more suitable for high-quality observation of the night sky. The mechanical part of the body and equipment will be quite poor, and you may have to spend money on some spare parts: eyepieces, filters, etc.
From twenty to one hundred thousand rubles. This category includes professional and semi-professional telescopes. Surely a beginner will have no need for a mirror camera with an astronomical cost. This is simply, as they say, a waste of money.
Conclusion
As a result, we met important information about how to make a simple telescope with your own hands, and some nuances of buying a new device for observing the stars. In addition to the method that we have considered, there are others, but this is a topic for another article. Whether you've built a telescope at home or purchased a new one, astronomy will take you into the unknown and provide experiences you've never experienced before.
Telescope- the dream of many, because there are so many stars in the universe that you want to look at each one. Store prices for this device are a bit steep for ordinary people, so there is an option to make a telescope with your own hands.
How to make a telescope at home?
For the simplest telescope we need:
Lenses, 2 pcs.;
- thick paper, several sheets;
- glue;
- magnifying glass.
Telescope diagram.
There are two types of telescopes - refractors and reflectors. We will do refracting telescope, since lenses for it can be bought at any pharmacy. A spectacle lens is required, diameter - 5 cm, diopters +0.5-1. For the eyepiece we will take a magnifying glass with a focal length of 2 cm.
Let's get started!
How to make the main tube for a telescope with your own hands?
From a sheet of thick paper, make a pipe with an approximate diameter of 5 cm. Then, straighten the sheet and paint the inside with black. You can use gouache paints. Rewind into a tube and secure the position using glue.
The length of our pipe should be about 2 meters.
How to make an eyepiece tube for a telescope?
We make this pipe in the same way as the main one. Length - 20 cm. Don't forget, this pipe will be put on the main one, so the diameter should be a little larger.
Once you glue the two pipes together, all that remains is to insert the lenses. Install them as shown in the diagram. Fix them well so that they are not damaged during use.
VIDEO. How to make a telescope?
It's safe to say that everyone has dreamed of taking a closer look at the stars. You can use binoculars or a spotting scope to admire the bright night sky, but you are unlikely to be able to see anything in detail through these devices. Here you will need more serious equipment - a telescope. To have such a miracle of optical technology at home, you need to pay a large sum, which not all lovers of beauty can afford. But don't despair. You can make a telescope with your own hands, and for this, no matter how absurd it may sound, you don’t have to be a great astronomer and designer. If only there was a desire and an irresistible craving for the unknown.
Why should you try making a telescope? We can definitely say that astronomy is a very complex science. And it requires a lot of effort from the person doing it. A situation may occur that you purchase an expensive telescope, and the science of the Universe will disappoint you, or you simply realize that this is not your thing at all. In order to figure out what’s what, it’s enough to make a telescope for an amateur. Observing the sky through such a device will allow you to see many times more than through binoculars, and you will also be able to figure out whether this activity is interesting to you. If you are passionate about studying the night sky, then, of course, you cannot do without a professional apparatus. What can you see with a homemade telescope? Descriptions of how to make a telescope can be found in many textbooks and books. Such a device will allow you to clearly see the lunar craters. With it you can see Jupiter and even make out its four main satellites. The rings of Saturn, familiar to us from the pages of textbooks, can also be seen using a telescope made by ourselves.
In addition, many more celestial bodies can be seen with your own eyes, for example, Venus, a large number of stars, clusters, nebulae. A little about the structure of the telescope The main parts of our unit are its lens and eyepiece. With the help of the first part, the light emitted by celestial bodies is collected. How distant bodies can be seen, as well as the magnification of the device, depends on the diameter of the lens. The second member of the tandem, the eyepiece, is designed to enlarge the resulting image so that our eye can admire the beauty of the stars. Now about the two most common types of optical devices - refractors and reflectors. The first type has a lens made of a lens system, and the second has a mirror lens. Lenses for a telescope, unlike a reflector mirror, can be found quite easily in specialized stores. Buying a mirror for a reflector will not be cheap, and making one yourself will be impossible for many.
Therefore, as has already become clear, we will be assembling a refractor, and not a reflecting telescope. Let's finish the theoretical excursion with the concept of telescope magnification. It is equal to the ratio of the focal lengths of the lens and eyepiece. Personal experience: how I got laser vision correction Actually, I didn’t always radiate joy and self-confidence. But first things first... How to make a telescope? Selecting materials In order to start assembling the device, you need to stock up on a 1-diopter lens or its blank. By the way, such a lens will have a focal length of one meter. The diameter of the blanks will be about seventy millimeters. It should also be noted that it is better not to choose spectacle lenses for a telescope, since they generally have a concave-convex shape and are poorly suited for a telescope, although if you have them on hand, you can use them. It is recommended to use long-focal lenses with a biconvex shape. As an eyepiece, you can take a regular magnifying glass with a thirty-millimeter diameter. If it is possible to get an eyepiece from the microscope, then it is certainly worth taking advantage of. It is also perfect for a telescope. What should we make the housing for our future optical assistant from? Two pipes of different diameters made of cardboard or thick paper are perfect. One (the shorter one) will be inserted into the second, with a larger diameter and longer.
A pipe with a smaller diameter should be made twenty centimeters long - this will ultimately be the eyepiece unit, and it is recommended to make the main one a meter long. If you don’t have the necessary blanks at hand, it doesn’t matter, the body can be made from an unnecessary roll of wallpaper. To do this, the wallpaper is wound in several layers to create the required thickness and rigidity and glued. How to make the diameter of the inner tube depends on what kind of lens we use. Stand for a telescope A very important point in creating your own telescope is preparing a special stand for it. Without it, it will be almost impossible to use it. There is an option to install the telescope on a camera tripod, which is equipped with a moving head, as well as fasteners that will allow you to fix different positions of the body. Assembling the telescope The lens for the objective is fixed in a small tube with the convex outward. It is recommended to fasten it using a frame, which is a ring similar in diameter to the lens itself.
You have a wonderful blank for the main mirror. But only if these are lenses from K8. Because condensers (and these are undoubtedly condenser lenses) often have a pair of lenses, one of which is made of crown, the other of which is made of flint. A flint lens is absolutely unsuitable as a blank for the main mirror for a number of reasons (one of which is great sensitivity to temperature). A flint lens is perfect as a base for a polishing pad, but it won’t work for grinding, since the flint lens has much greater hardness and grindability than the crown. In this case, use a plastic sander.
Secondly, I strongly advise you to carefully read not only Sikoruk’s book, but also “The Telescope of an Amateur Astronomer” by M.S. Navashina. And with regard to testing and measuring the mirror, you should focus specifically on Navashin, who describes this aspect in great detail. Naturally, it is not worth making a shadow device exactly “according to Navashin”, since now it is easy to make such improvements to its design as using powerful LED as a light source (which will significantly increase the light intensity and quality of measurements on an uncoated mirror, and will also allow the “star” to be brought closer to the knife; it is advisable to use a rail from an optical bench, etc. as a base). You need to approach the manufacture of a shadow device with great care, since the quality of your mirror will be determined by how well you make it.
In addition to the above-mentioned rail from the optical bench, a useful “swag” for its manufacture is a support from a lathe, which will be a wonderful device for smoothly moving a Foucault knife and at the same time for measuring this movement. An equally useful find would be a ready-made slit from a monochromator or diffractometer. I also advise you to attach a webcam to the shadow device - this will eliminate the error from the position of the eye, reduce convection interference from the heat of your body, and in addition, it will allow you to register and store all the shadow patterns during the process of polishing and figuring the mirror. In any case, the base for the shadow device must be reliable and heavy, the fastening of all parts must be ideally rigid and strong, and movement must be without backlash. Organize a pipe or tunnel along the entire path of the rays - this will reduce the impact of convection currents, and in addition, will allow you to work in the light. In general, convection currents are the bane of any mirror testing method. Fight them with all possible means.
Invest in good abrasives and resin. Cooking resin and sanding abrasives is, firstly, an unproductive expenditure of effort, and secondly, bad resin is a bad mirror, and bad abrasives are a lot of scratches. But the grinding machine can and should be the most primitive; the only requirement for it is impeccable rigidity of the structure. Here is an absolutely ideal wooden barrel, covered with rubble, around which Chikin, Maksutov and other “founding fathers” once walked. A useful addition to Chikin’s barrel is the “Grace” disk, which allows you not to wind kilometers around the barrel, but to work while standing in one place. It is better to equip a barrel for roughing and rough grinding outdoors, but fine grinding and polishing is a matter for indoors. constant temperature and without drafts. An alternative to the barrel, especially at the stage of fine grinding and polishing, is the floor. It is, of course, less convenient to work on your knees, but the rigidity of such a “machine” is ideal.
Need to Special attention pay attention to securing the workpiece. A good option for unloading the lens is to glue it to a “patch” of minimal size in the center and three stops near the edges, which should only touch, but not put pressure on, the workpiece. The patch needs to be sanded flat and brought to No. 120.
To prevent scratches and chips, it is necessary to chamfer the edge of the workpiece before roughing and bring it to a fine grind. The width of the chamfer should be calculated so that it is preserved until the end of work with the mirror. If the chamfer “ends” during the process, it must be resumed. The chamfer must be uniform, otherwise it will be a source of astigmatism.
The most rational way to grind is with a ring or a reduced grinding blade in the “mirror below” position, but given the small size of the mirror, you can also do it according to Navashin - mirror on top, grinding blade normal size. Silicon carbide or boron carbide is used as an abrasive. When stripping, you need to be careful not to refine the astigmatism and “go” into the hyperboloid shape, which such a system has a clear tendency to do. The latter can be avoided by alternating a normal stroke with a shortened one, especially towards the end of the stripping. If during grinding the surface initially obtained is as close as possible to a sphere, this will dramatically speed up all further grinding work.
Abrasives for grinding - starting from number 120 and finer, it is better to use electrocorundum, and for larger ones, carborundum. The main characteristic abrasives, which we must strive for is the narrowness of the particle distribution spectrum. If the particles in a given specific abrasive number vary in size, then the larger grains are the source of scratches, and the smaller ones are the source of local errors. And with abrasives of this quality, their “stairs” should be much flatter, and we will arrive at polishing with “waves” on the surface, which will then take a long time to get rid of.
The shaman's trick against this with not the best abrasives is to polish the mirror with an even finer abrasive before changing the number to a finer one. For example, instead of the series 80-120-220-400-600-30u-12u-5u the series will be: 80-120-400-220-600-400-30u-600... and so on, and these intermediate stages are quite short. Why this works - I don't know. With a good abrasive you can grind after the 220th number immediately with a thirty-micron one. It is good to add “Fairy” to coarse (up to No. 220) abrasives diluted with water. It makes sense to look for micron powders with the addition of talc (or add it yourself, but you need to be sure that the talc is abrasive and sterile) - it reduces the likelihood of scratches, facilitates the grinding process and reduces biting.
Another tip that allows you to control the shape of the mirror even at the grinding stage (even not fine) is to polish the surface by rubbing suede with polish until it shines, after which you can easily determine the focal point by the Sun or a lamp and even (at finer stages of grinding) get shadow picture. A sign of the accuracy of the spherical shape is also the uniformity of the ground surface and the rapid uniform grinding of the entire surface after changing the abrasive. Vary the length of the stroke within small limits - this will help avoid a “broken” surface.
The process of polishing and figuration is probably described so well and in detail that it would be wiser not to go into it but to send it to Navashin. True, he recommends crocus, but now everyone uses polyrite, otherwise everything is the same. Crocus, by the way, is useful for figuration - it works slower than polyrite, and there is less risk of “missing” the required form.
Directly behind the lens, further along the pipe, it is necessary to equip a diaphragm in the form of a disk with a thirty-millimeter hole exactly in the middle. The purpose of the aperture is to eliminate image distortion caused by the use of a single lens. Also, installing it will affect the reduction of light that the lens receives. The telescope lens itself is mounted near the main tube. Naturally, the eyepiece assembly cannot do without the eyepiece itself. First you need to prepare fastenings for it. They are made in the form of a cardboard cylinder and are similar in diameter to an eyepiece. The fastening is installed inside the pipe using two disks. They are the same diameter as the cylinder and have holes in the middle. Setting up the device at home You need to focus the image using the distance from the lens to the eyepiece. To do this, the eyepiece assembly moves in the main tube.
Since the pipes must be well pressed together, the required position will be securely fixed. It is convenient to perform the tuning process on large bright bodies, for example, the Moon; a neighboring house will also work. When assembling, it is very important to ensure that the lens and eyepiece are parallel and their centers are on the same straight line. Another way to make a telescope with your own hands is to change the size of the aperture. By varying its diameter, you can achieve the optimal picture. Using optical lenses of 0.6 diopters, which have a focal length of approximately two meters, you can increase the aperture and make the zoom much closer on our telescope, but you should understand that the body will also increase.
Watch out - Sun! By the standards of the Universe, our Sun is far from the brightest star. However, for us it is a very important source of life. Naturally, having a telescope at their disposal, many will want to take a closer look at it. But you need to know that this is very dangerous. After all, sunlight, passing through the optical systems we have built, can be focused to such an extent that it will be able to burn through even thick paper. What can we say about the delicate retina of our eyes? Therefore, you need to remember a very important rule: you cannot look at the Sun through zooming devices, especially a home telescope, without special protective equipment.
First of all, you need to purchase a lens and eyepiece. As a lens, you can use two glasses glasses (menisci) of +0.5 diopters each, placing their convex sides, one outward and the other inward, at a distance of 30 mm from one another. Between them, place a diaphragm with a hole with a diameter of about 30 mm. This is in as a last resort. But it's better to use a long lens biconvex lens.
For the eyepiece, you can take a regular magnifying glass (loupe) 5-10x with a small diameter of about 30 mm. An eyepiece from a microscope may also be an option. Such a telescope will provide a magnification of 20-40 times.
For the body, you can take thick paper or pick up metal or plastic tubes (there should be two of them). Short tube(about 20 cm, eyepiece unit) is inserted into the long one (about 1 m, main). The inner diameter of the main pipe should be equal to the diameter of the spectacle lens.
The lens (spectacle lens) is mounted in the first tube with the convex side outward using a frame (rings with a diameter equal to the diameter of the lens and a thickness of about 10 mm). A disk is installed immediately behind the lens - a diaphragm with a hole in the center with a diameter of 25 - 30 mm, this is necessary in order to reduce significant image distortions resulting from a single lens. The lens is installed closer to the edge of the main tube. The eyepiece is installed in the eyepiece assembly closer to its edge. To do this, you will have to make an eyepiece mount from cardboard. It will consist of a cylinder equal in diameter to the eyepiece. This cylinder will be attached to inside pipes with two disks with a diameter equal to the inner diameter of the eyepiece assembly with a hole equal in diameter to the eyepiece.
Focusing is done by changing the distance between the lens and the eyepiece due to the movement of the eyepiece unit in the main tube, and fixation will occur due to friction. It is better to focus on bright and large objects: the Moon, bright stars, nearby buildings.
When creating a telescope, it is necessary to take into account that the lens and eyepiece must be parallel to each other, and their centers must be strictly on the same line.
Making a homemade reflecting telescope
There are several systems of reflecting telescopes. It is easier for an astronomy enthusiast to make a Newtonian system reflector.
Plano-convex condenser lenses for photographic enlargers can be used as mirrors by treating their flat surface. Such lenses with a diameter of up to 113 mm can also be purchased in photo stores.
The concave spherical surface of a polished mirror reflects only about 5% of the light incident on it. Therefore, it must be coated with a reflective layer of aluminum or silver. It is impossible to aluminize a mirror at home, but silvering it is quite possible.
In a reflecting telescope of the Newtonian system, a diagonal plane mirror deflects sideways the cone of rays reflected from the main mirror. Making a flat mirror yourself is very difficult, so use a total internal reflection prism from prismatic binoculars. You can also use the flat surface of a lens or the surface of a camera filter for this purpose. Cover it with a layer of silver.
Set of eyepieces: weak eyepiece with a focal length of 25-30 mm; average 10-15 mm; strong 5-7 mm. You can use eyepieces from a microscope, binoculars, and lenses from small-format movie cameras for this purpose.
Mount the main mirror, flat diagonal mirror and eyepiece in the telescope tube.
For a reflecting telescope, make a parallax tripod with a polar axis and a declination axis. The polar axis should be directed towards the North Star.
Such means are considered to be light filters and a method of projecting an image onto a screen. What if you couldn’t assemble a telescope with your own hands, but you really want to look at the stars? If for some reason it is impossible to assemble a homemade telescope, then do not despair. You can find a telescope in a store for a reasonable price. The question immediately arises: “Where are they sold?” Such equipment can be found in specialized astro-device stores. If there is nothing like this in your city, then you should visit a photographic equipment store or find another store that sells telescopes. If you are lucky - there is a specialized store in your city, and even with professional consultants, then this is definitely the place for you. Before going, it is recommended to look at an overview of telescopes. First, you will understand the characteristics of optical devices. Secondly, it will be more difficult to deceive you and slip you a low-quality product.
Then you will definitely not be disappointed in your purchase. A few words about buying a telescope through the World Wide Web. This type of shopping is becoming very popular nowadays, and it is possible that you will use it. It’s very convenient: you look for the device you need, and then order it. However, you may come across the following nuisance: after a long selection, it may turn out that the product is no longer in stock. A much more unpleasant problem is the delivery of goods. It is no secret that a telescope is a very fragile thing, so only fragments can be delivered to you. It is possible to purchase a telescope by hand.
This option will allow you to save a lot of money, but you should be well prepared so as not to buy a broken item. A good place to find a potential seller is astronomer forums. Price per telescope Let's consider some price categories: About five thousand rubles. Such a device will correspond to the characteristics of a telescope made with your own hands at home. Up to ten thousand rubles. This device will certainly be more suitable for high-quality observation of the night sky. The mechanical part of the case and the equipment will be very meager, and you may have to spend money on some spare parts: eyepieces, filters, etc. From twenty to one hundred thousand rubles. This category includes professional and semi-professional telescopes.
Astronomy enthusiasts build homemade reflecting telescopes mainly according to the Newtonian system. It was Isaac Newton who first created the reflecting telescope around 1670. This allowed him to get rid of chromatic aberrations (they lead to a decrease in image clarity, to the appearance of colored contours or stripes on it that are not present on a real object) - the main drawback of the refracting telescopes that existed at that time.
diagonal mirror - this mirror directs a beam of reflected rays through the eyepiece to the observer. The element designated by number 3 is the eyepiece assembly.
The focus of the main mirror and the focus of the eyepiece inserted into the eyepiece tube must coincide. The focus of the primary mirror is defined as the top of the cone of rays reflected by the mirror.
A diagonal mirror is made in small sizes, it is flat and can have a rectangular or elliptical shape. A diagonal mirror is installed on the optical axis of the main mirror (lens), at an angle of 45° to it.
An ordinary household flat mirror is not always suitable for use as a diagonal mirror in a homemade telescope - the telescope requires an optically more accurate surface. Therefore, a flat surface of a flat-concave or flat-convex optical lens can be used as a diagonal mirror if this plane is first coated with a layer of silver or aluminum.
The dimensions of a flat diagonal mirror for a homemade telescope are determined from the graphical construction of the cone of rays that are reflected by the main mirror. With a rectangular or elliptical mirror shape, the sides or axes have a ratio of 1:1.4 to each other.
The lens and eyepiece of a homemade reflecting telescope are mounted mutually perpendicular to the telescope tube. To mount the main mirror of a homemade telescope, a frame, wooden or metal, is required.
To make a wooden frame for the main mirror of a homemade reflecting telescope, you can take a round or octagonal board with a thickness of at least 10 mm and 15-20 mm larger than the diameter of the main mirror. The main mirror is fixed to this board with 4 pieces of thick-walled rubber tube, mounted on screws. For better fixation, you can place plastic washers under the heads of the screws (they cannot clamp the mirror itself).
The tube of a homemade telescope is made from a piece of metal pipe, from several layers of cardboard glued together. You can also make a metal-cardboard pipe.
Three layers of thick cardboard should be glued together with carpenter or casein glue, then insert the cardboard tube into the metal stiffening rings. Metal is also used to make a bowl for the frame of the main mirror of a homemade telescope and a pipe cover.
The length of the pipe (tube) of a homemade reflecting telescope should be equal to the focal length of the main mirror, and the internal diameter of the pipe should be 1.25 times the diameter of the main mirror. The inside of the tube of a homemade reflecting telescope should be “blackened”, i.e. cover it with matte black paper or paint it with matte black paint.
The eyepiece assembly of a homemade reflecting telescope in its simplest design can be based, as they say, “on friction”: the movable inner tube moves along the fixed outer one, providing the necessary focusing. The eyepiece assembly can also be threaded.
Before use, a homemade reflecting telescope must be installed on a special stand - a mount. You can purchase either a ready-made factory mount or make it yourself from scrap materials. You can read more about the types of mounts for homemade telescopes in our following materials.
Surely a beginner will have no need for a mirror camera with an astronomical cost. This is simply, as they say, a waste of money. Conclusion As a result, we got acquainted with important information about how to make a simple telescope with your own hands, and some of the nuances of buying a new device for observing the stars. In addition to the method that we have considered, there are others, but this is a topic for another article. Whether you've built a telescope at home or purchased a new one, astronomy will take you into the unknown and provide experiences you've never experienced before.
A spectacle glass tube is essentially a simple refractor with a single lens instead of an objective lens. Rays of light coming from the observed object are collected in a tube by a lens lens. To eliminate the rainbow coloring of the image and chromatic aberration, two lenses made of different types of glass are used. Each surface of these lenses must have its own curvature, and
all four surfaces must be coaxial. It is almost impossible to make such a lens under amateur conditions. It is difficult to get a good, even small, lens lens for a telescope.
H0 there is another system - a reflecting telescope. or reflector. In it, the lens is a concave mirror, where only one reflective surface needs to be given precise curvature. How is it built?
Rays of light come from the observed object (Fig. 1). The main concave (in the simplest case - spherical) mirror 1, which collects these rays, gives an image in the focal plane, which is viewed through the eyepiece 3. In the path of the beam of rays reflected from the main mirror, a small flat mirror 2 is placed, located at an angle of 45 degrees to main optical axis. It deflects the cone of rays at a right angle so that the observer does not block the open end of the telescope tube 4 with his head. On the side of the tube opposite the diagonal flat mirror, a hole was cut for the exit of the cone of rays and the eyepiece tube 5 was strengthened. Despite this. that the reflective surface is processed with very high precision - the deviation from the given size should not exceed 0.07 microns (seven hundred thousandths of a millimeter) - the manufacture of such a mirror is quite accessible to a schoolchild.
First cut out the main mirror.
The main concave mirror can be made from ordinary mirror, table or display glass. It must have sufficient thickness and be well annealed. Poorly annealed glass warps greatly when the temperature changes, and this distorts the shape of the mirror surface. Plexiglass, plexiglass and other plastics are not suitable at all. The thickness of the mirror should be slightly more than 8 mm, the diameter no more than 100 mm. A slurry of emery powder or carborundum with water is applied under a piece of metal pipe of suitable diameter with a wall thickness of 02-2 mm. Two disks are cut from mirror glass. You can manually cut a disk with a diameter of 100 mm from glass 8 - 10 mm thick in about an hour to make the work easier, you can use a machine (Fig. 2).
The frame is strengthened on the base 1
3. An axis 4, equipped with a handle 5, passes through the middle of its upper crossbar. A tubular drill 2 is attached to the lower end of the axis, and a weight b is attached to the upper end. The drill axis can be equipped with bearings. You can make a motor drive, then you don’t have to turn the handle. The machine is made of wood or metal.
Now - sanding
If you place one glass disk on top of another and, having smeared the contacting surfaces with a mixture of abrasive powder and water, move the upper disk towards and away from you, at the same time evenly rotating both disks in opposite directions, then they will be ground to one another. The lower disk gradually becomes more convex, and the upper one becomes concave. When the desired radius of curvature is reached - which is checked by the depth of the center of the recess - the arrow of curvature - they move on to finer abrasive powders (until the glass becomes dark matte). The radius of curvature is determined by the formula: X =
where y is the radius of the main mirror; . P is the focal length.
for the first homemade telescope, the mirror diameter (2y) is chosen to be 100-120 mm; F - 1000--1200 mm. The concave surface of the upper disk will be reflective. But it still needs to be polished and coated with a reflective layer.
How to get an accurate sphere
The next stage is polishing.
The instrument is the same second glass Disc. It needs to be turned into a polishing pad, and to do this, apply a layer of resin mixed with rosin to the surface (the mixture gives the polishing layer greater hardness).
The resin for polishing pad is prepared like this. Melt the rosin in a small saucepan over low heat. and then small pieces of soft resin are added to it. The mixture is stirred with a stick. It is difficult to determine in advance the ratio of rosin and resin. After cooling a drop of the mixture well, you need to test it for hardness. If the nail thumb with strong pressure it leaves a shallow mark - the hardness of the resin is close to the required one. You cannot bring the resin to a boil and form bubbles; it will be unsuitable for work. A network of longitudinal and transverse grooves is cut on the layer of polishing mixture so that the polishing substance and air circulate freely during operation and the resin areas provide good contact with the Mirror. Polishing is done in the same way as sanding: the mirror moves back and forth; In addition, both the polishing pad and the mirror are turned little by little in opposite directions. To obtain the most accurate sphere possible, during grinding and polishing it is very important to maintain a certain rhythm of movements, uniformity in the length of the “stroke” and the rotations of both glasses.
All this work is done on a simple homemade machine (Fig. 3), similar in design to a pottery machine. A rotating wooden table with an axis passing through the base is placed on a thick board base. The grinder or polishing pad is mounted on this table. To prevent the wood from warping, it is impregnated with oil, paraffin or waterproof paint.
The Fouquet device comes to the rescue
Is it possible, without going to a special optical laboratory, to check how accurate the surface of the mirror is? It is possible if you use a device designed about a hundred years ago by the famous French physicist Foucault. The principle of its operation is surprisingly simple, and the measurement accuracy is up to hundredths of a micron. The famous Soviet optics scientist D.D. Maksutov in his youth made an excellent parabolic mirror (and a parabolic surface is much more difficult to obtain than a sphere), using this very device, assembled from a kerosene lamp, a piece of blade from a hacksaw and wooden blocks to test it. . Here's how it works (Figure 4)
A point source of light I, for example, a puncture in the foil illuminated by a bright light bulb, is located near the center of curvature O of mirror Z. The mirror is slightly rotated so that the top of the cone of reflected rays O1 is located somewhat away from the light source itself. This vertex can be crossed by a thin flat screen H with a straight edge - a “Foucault knife”. By placing the eye behind the screen near the point where the reflected rays converge, we will see that the entire mirror is, as it were, flooded with light. If the surface of the mirror is exactly spherical, then when the screen crosses the top of the cone, the entire mirror will begin to fade evenly. But a spherical surface (not a sphere) cannot collect all the rays at one point. Some of them will intersect in front of the screen, some - behind it. Then we see a relief shadow picture” (Fig. 5), from which we can find out what deviations from the sphere there are on the surface of the mirror. By changing the polishing mode in a certain way, they can be eliminated.
The sensitivity of the shadow method can be judged from this experience. If you place your finger on the surface of the mirror for a few seconds and then look using a shadow device; then in the place where the finger was applied, a mound with quite
a noticeable shadow gradually disappearing. The shadow device clearly showed an insignificant elevation formed from the heating of a section of the mirror upon contact with a finger. If “Foucault’s knife extinguishes the entire mirror at the same time, then its surface is truly an exact sphere.
A few more important tips
Once the mirror has been polished and its surface precisely shaped, the reflective concave surface must be aluminized or silver plated. The reflective layer of aluminum is very durable, but it is possible to cover a mirror with it only in a special installation under vacuum. Alas, fans do not have such settings. But you can silver plate a mirror at home. The only pity is that silver fades quite quickly and the reflective layer has to be renewed.
A good primary mirror for a telescope is the main one. A flat diagonal mirror in small reflecting telescopes can be replaced by a prism with total internal reflection, used, for example, in prismatic binoculars. Ordinary flat mirrors used in everyday life are not suitable for a telescope.
Eyepieces can be picked up from an old microscope or geodetic instruments. In extreme cases, a single biconvex or plano-convex lens can serve as an eyepiece.
The tube (tube) and the entire installation of the telescope can be done in the most various options- from the simplest, where the material is cardboard, planks and wooden blocks(Fig. 6), to very perfect. with Parts and specially cast parts turned on a lathe. But the main thing is the strength and stability of the pipe. Otherwise, especially when high magnifications, the image will shake and it will be difficult to focus the eyepiece, and it will be inconvenient to work with the telescope
Now the main thing is patience
A 7th-8th grade student can make a telescope that gives very good images at magnifications of up to 150 times or more. But this work requires a lot of patience, perseverance and accuracy. But what joy and pride should one feel who gets acquainted with space with the help of the most precise optical instrument - a telescope, made with his own hands!
The hardest part to produce yourself is the main mirror. We recommend you a new, fairly simple method of making it, for which there is no need for complex equipment and special machines. True, you need to strictly follow all the tips for fine grinding and especially for polishing a mirror. Only when given condition you can build a telescope that is no worse than an industrial one. It is this detail that causes the most difficulties. Therefore, we will talk about all the other details very briefly.
The blank for the main mirror is a glass disk 15-20mm thick.
You can use a lens from a photo enlarger condenser, which are often sold in shopping centers photo products. Or glue thin glass disks with epoxy glue, which can be easily cut with a diamond or roller glass cutter. Make sure that the adhesive joint is as thin as possible. A “layered” mirror has some advantages over a solid one - it is not as susceptible to warping when the ambient temperature changes, and therefore gives an image of better quality.
The grinding disc can be glass, iron or cement-concrete. The diameter of the grinding disc should be equal to the diameter of the mirror, and its thickness should be 25-30mm. The working surface of the grinding pad should be glass or, even better, made of cured epoxy resin with a layer of 5-8mm. Therefore, if you managed to turn or select a suitable disk from scrap metal, or cast it from cement mortar (1 part cement and 3 parts sand), then you need to design its working side, as shown in Figure 2.
Abrasive powders for grinding can be made from carborundum, corundum, emery or quartz sand. The latter polishes slowly, but despite all the above, the quality of the finish is noticeably higher. The abrasive grains (200-300 g will be needed) for rough grinding, when we need to make the required radius of curvature in the mirror blank, should be 0.3-0.4 mm in size. Apart from this, smaller powders with grain sizes will be required.
If it is not possible to purchase ready-made powders, then it is quite possible to prepare them yourself by crushing small pieces of an abrasive grinding wheel in a mortar.
Rough grinding of the mirror.
Secure the sanding pad to a stable stand or table with the working side facing up. You should take care of the painstaking cleaning of your home grinding “machine” after replacing abrasives. Why should a layer of linoleum or rubber be laid on its surface? A special tray is very convenient, which, together with the mirror, can then be removed from the table after work. Rough grinding is done using a reliable “old-fashioned” method. Mix abrasive with water in a ratio of 1:2. Spread about 0.5 cm3 over the surface of the sanding pad. the resulting slurry, place a blank mirror outside downwards and start sanding. Hold the mirror with two hands, this will protect it from falling, and the correct position of the hands will quickly and accurately obtain the desired radius of curvature. When grinding, make movements (strokes) in the direction of the diameter, evenly rotating the mirror and grinder.
Try from the very beginning to accustom yourself to the subsequent rhythm of work: for every 5 strokes, turn the mirror 60° in your hands. Work rate: approximately 100 strokes per minute. As you move the mirror back and forth across the surface of the sanding pad, try to keep it in a state of stable equilibrium on the circumference of the sanding pad. As grinding progresses, the crunch of the abrasive and the intensity of grinding decreases, the plane of the mirror and the grinding pad becomes contaminated with spent abrasive and particles of glass with water - sludge. It must be washed off from time to time or wiped with a damp sponge. After sanding for 30 minutes, check the size of the indentation using metal ruler and safety razor blades. Knowing the thickness and number of blades that fit into the gap between the ruler and the central part of the mirror, you can easily measure the resulting recess. If it is not enough, continue grinding until you get the required value (in our case - 0.9mm). If the grinding powder good quality, then rough grinding can be completed in 1-2 hours.
Fine grinding.
For fine finishing, the surfaces of the mirror and the grinding pad are ground against each other with the highest precision. spherical surface. Grinding is done in several passes using increasingly fine abrasives. If during coarse grinding the center of pressure was located near the edges of the grinder, then during fine grinding it should be no more than 1/6 of the workpiece diameter from its center. At times it is necessary to make, as it were, erroneous movements of the mirror along the surface of the grinding pad, now to the left, now to the right. Start fine sanding only after thorough cleaning. Large, hard particles of abrasive should not be allowed near the mirror. They have the unpleasant ability to “independently” seep into the grinding area and produce scratches. At first, use an abrasive with a particle size of 0.1-0.12 mm. The finer the abrasive, the smaller doses it should be added. Depending on the type of abrasive, you need to experimentally select its concentration with water in suspension and the portion value. The time of its production (suspension), as well as the frequency of sludge removal. It is impossible to allow the mirror to catch (get stuck) on the grinder. It is convenient to keep the abrasive suspension in bottles with plastic tubes with a diameter of 2-3 mm inserted into the stoppers. This will make it easier to apply it to the work surface and protect it from clogging with large particles.
Check the grinding progress by viewing the mirror against the light after rinsing with water. Large chips left after clumsy grinding should completely disappear, the dullness should be completely uniform - only in this case can the work with this abrasive be considered completed. It is useful to work an extra 15-20 minutes in order to ensure that you polish not only unnoticed gouges, but also the layer of microcracks. After this, rinse the mirror, sanding pad, tray, table, hands and proceed to sanding with another, smallest abrasive. Add the abrasive suspension evenly, a few drops at a time, shaking the bottle beforehand. If you add too little abrasive suspension or if there are huge deviations from the spherical surface, then the mirror can “stick”. Therefore, you need to place the mirror on the grinding pad and make the first movements very carefully, without much pressure. Particularly ticklish is the “grabbing” of the mirror on late stages fine grinding. If such a threat has occurred, then under no circumstances should you rush. Take the trouble to evenly (over 20 minutes) heat the mirror with the grinding pad under running warm water to a temperature of 50-60°, and then cool them. Then the mirror and the grinding pad will move apart. You can tap a piece of wood on the edge of the mirror in the direction of its radius, taking all precautions. Do not forget that glass is a very fragile material and has low thermal conductivity, and at a very large temperature difference it cracks, as sometimes happens with a glass glass if boiling water is poured into it. Quality control at the final steps of fine grinding should be carried out using a powerful magnifying glass or microscope. At the final stages of fine grinding, the likelihood of scratches increases dramatically.
Therefore, we list measures to prevent their occurrence:
perform thorough cleaning and washing of the mirror, tray, hands;
do wet cleaning in the work area after each approach;
try to remove the mirror from the grinding pad as little as possible. It is necessary to add abrasive by moving the mirror to the side by half its diameter, evenly distributing it according to the surface of the grinding pad;
Having placed the mirror on the grinding pad, press it, and large particles that accidentally fall on the grinding pad will be crushed and will not scratch the plane of the glass blank.
Individual scratches or pits will not spoil the image quality. However, if there are a lot of them, they will reduce the contrast. After fine grinding, the mirror becomes translucent and perfectly reflects light rays falling at an angle of 15-20°. Once you are sure that this is the case, grind it without any pressure, quickly turning it to equalize the temperature from the warmth of your hands. If on a thin layer of the finest abrasive the mirror moves simply, with a slight whistle, reminiscent of whistling through teeth, then this means that its surface is very close to spherical and differs from it only by hundredths of a micron. Our task during the subsequent polishing operation is not to spoil it in any way.
Mirror polishing
The difference between mirror polishing and fine grinding is that it is performed on a soft material. High-precision optical surfaces are obtained by polishing on resin polishing pads. Moreover, the harder the resin and the smaller its layer on the surface of the hard grinding pad (it is used as the basis of the polishing pad), the more accurate the surface of the sphere on the mirror is. To make a resin polishing pad, you first need to prepare a bitumen-rosin mixture in solvents. To do this, grind 20 g of grade IV petroleum bitumen and 30 g of rosin into small pieces, mix them and pour them into a 100 cm3 bottle; then pour 30 ml of gasoline and 30 ml of acetone into it and close with a stopper. To speed up the dissolution of rosin and bitumen, shake the mixture periodically, and after a few hours the varnish will be ready. Apply a layer of varnish to the surface of the sanding pad and let it dry. The thickness of this layer after drying should be 0.2-0.3 mm. After this, pick up the varnish with a pipette and drop one drop at a time onto the dried layer, preventing the drops from merging. What is very important is to distribute the drops evenly. After the varnish has dried, the polishing pad is ready for use.
Then prepare a polishing suspension - a mixture of polishing powder and water in a ratio of 1:3 or 1:4. It is also convenient to store it in a bottle with a stopper, equipped with a plastic tube. Now you have everything you need to polish the mirror. Wet the surface of the mirror with water and drop a few drops of polishing suspension onto it. Then carefully place the mirror on the polishing pad and move it around. The movements during polishing are the same as for fine grinding. But you can press on the mirror only when it moves forward (shift from the polishing pad); it is necessary to return it to its original position without any pressure, holding its cylindrical part with your fingers. Polishing will proceed almost silently. If the room is quiet, you may hear a noise that sounds like breathing. Polish slowly, without pressing too hard on the mirror. It is important to set a mode in which the mirror under load (3-4 kg) goes forward quite tightly, but goes back easily. The polishing pad seems to “get used” to this regime. The number of strokes is 80-100 per minute. Make incorrect movements from time to time. Check the condition of the polishing pad. Its pattern should be uniform. If necessary, dry it and drip varnish in the right places, after thoroughly shaking the bottle with it. The polishing process should be monitored through light, using a strong magnifying glass or microscope with a magnification of 50-60 times.
The surface of the mirror should be polished evenly. Very bad if it polishes faster middle zone mirrors or at the edges. This can happen if the surface of the polishing pad is not spherical. This defect must be eliminated immediately by adding bitumen-rosin varnish to low areas. After 3-4 hours the work usually comes to an end. If you examine the edges of the mirror through a strong magnifying glass or microscope, you will no longer see the pits and minor scratches. It is useful to work for another 20-30 minutes, reducing the pressure by two to three times and stopping for 2-3 minutes every 5 minutes of work. This ensures temperature equalization from the heat of friction and hands and the mirror acquires a more accurate spherical surface shape. So, the mirror is ready. Now about design features and telescope parts. Types of the telescope are shown in the sketches. You will need few materials, and they are all available and relatively cheap. As a secondary mirror, you can use a total internal reflection prism from a large binocular, a lens or a light filter from a camera, the flat surfaces of which have a reflective coating applied. As a telescope eyepiece, you can use an eyepiece from a microscope, a short-focus lens from a camera, or single plano-convex lenses with a focal length of 5 to 20 mm. It should be especially noted that the frames of the primary and secondary mirrors must be made very carefully.
The quality of the image depends on their correct adjustment. The mirror in the frame should be fixed with a small gap. The mirror should not be allowed to be jammed in the radial or axial direction. In order for a telescope to provide a high-quality image, its optical axis must coincide with the direction towards the object of observation. This adjustment is made by changing the position of the secondary auxiliary mirror, and then by adjusting the adjustment nuts of the primary mirror frame. When the telescope is assembled, it is necessary to make reflective coatings on the working surfaces of the mirrors and install them. The easiest way is to cover the mirror with silver. This coating reflects more than 90% of light, but fades over time. If you master the method of chemical deposition of silver and take measures against tarnishing, then for most amateur astronomers this will be the best solution to the problem.
This article is intended for those amateur astronomers who have already played with binoculars and a refracting telescope, looked at the phases of Venus, the rings of Saturn and the moons of Jupiter, and want something less boring and more stunning. For example, 1000x with a huge lens. It is impossible to do this with lenses alone: they produce so-called chromatic aberration, which manifests itself in the form of rainbow halos around objects, the stronger the stronger the magnification of the telescope.
Therefore, the task arises of assembling a homemade reflecting telescope, that is, a telescope on mirrors. In his simplest form it consists of two mirrors (lens and diagonal) and one eyepiece lens.
Where to get it
The main mirror-lens of a reflecting telescope is its most important and critical part. And it is also the most difficult to manufacture. Finding a ready-made mirror of this type is almost impossible.
Although there is one way: you can make this from a concave or convex-concave lens. Find a concave or convex-concave lens of the most big size whatever you can find. It is important that the focal length be as high as possible, and, therefore, the concavity as small as possible: from too powerful concave lenses, not a spherical, but a parabolic shape is required, and this is a completely different deficiency that cannot be improvised in any way.
The most reliable calculation is to find a plano-concave with a diameter of 10-12 cm and optical power 1 diopter. Look for it in optical stores. Thus, a homemade telescope of 1000x will not work, but you can do something with it.
Silver plating using chemistry
Then you need to do silvering to get a mirror. Prepare a solution called Tollens' reagent. In order to prepare this reagent, you need: silver nitrate (lapis), caustic soda (caustic soda) and ammonia solution.
This reagent kit also includes formaldehyde (formaldehyde solution). Dissolve 1 g of silver nitrate in 10 ml of water, and 1 g of sodium hydroxide in another 10 ml of water. Mix these solutions, a white precipitate should form. Add ammonia solution until the precipitate dissolves. This solution is Tollens' reagent.
To use it for silvering, you should pour it into the concave part, which has previously been thoroughly cleaned of any contaminants. If the concavity is very weak, you should make a barrier of wax or plasticine along its edge.
Having poured the reagent, you should begin to add formaldehyde to it in frequent drops. Soon a film of silver will form and it will turn into a concave mirror. Keep in mind that Tollens' reagent does not have a long shelf life; it must be used immediately after it is prepared.
There are also ways to make a concave surface yourself, first of all - grinding the concave surface on glass circles. However, these methods are too complicated and are not recommended for use by beginners.
A diagonal mirror should be made in the same way as a concave one. It should be perfectly straight; For its manufacture, the flat side of any plano-convex or plano-concave is suitable.
Telescope assembly
Now you can start assembling your homemade one. You will need a tube exactly the length of the focal length (if you used a 1 diopter plano-concave lens for manufacturing, then take a tube 100 cm long, +0.5-1 cm adjustment for thickness).
The pipe should be open at one end and closed at the other, and painted inside with the blackest paint you can find. The diameter of the pipe should be 1.25 times the diameter of the refractor mirror; if you used a lens with a diameter of 100 mm to make it, take a pipe with a diameter of 125 mm.
Attach the lens mirror to the bottom of the pipe, exactly in the center. To make it convenient to do this, it is better to provide a removable bottom. You can attach the lens to the bottom, for example, with superglue.
Make a hole closer to the open end of the pipe. To calculate the desired position for the hole, measure its radius from the open end of the pipe. This is where the center of the hole should be. The eyepiece will be fixed in this hole (perpendicular to the pipe).
It should hang on the optical axis at an angle of 45 degrees. If the angle is maintained correctly, then when you look through the eyepiece you will see the image. If you don't succeed the first time, experiment with the angle.
Do you know how to make a telescope out of binoculars - to look at what is far away? No? Then this article is for you.
We all know that with the help of binoculars you can see quite distant objects that cannot be seen by the ordinary human eye.
If you are already tired of watching animals, people or cars and you have long been harboring a dream of seeing the moon or starry sky, then this article is for you. Today we will tell you how to make a telescope from binoculars.
Making a telescope
The main function of any optical device is magnification. To achieve good magnification, we need the simplest binoculars. The theater one is very suitable for this purpose. Due to its small magnification, we can achieve magnification in the telescope up to 20-30 times. Of course, if you choose a more powerful binocular model, then the magnification will be greater, but keep in mind that very high magnification does not give a very clear picture.
In order to assemble a telescope, we need only one eyepiece, since, as we know, a telescope is observed with only one eye. Of course, we will also need a second eyepiece, but if we unscrew it from the binoculars, then the device will accordingly become unsuitable for use in the area for which it was originally intended. If you don’t want to spoil such a wonderful binocular, you can buy a separate eyepiece, the magnification of which is no more than 8x.
So, we take an additional eyepiece and install it so that it is a few centimeters opposite the binocular eyepiece. The distance between them should be selected “by eye” by pointing at some object. During adjustment, you should cover the interocular space with something dense and dark, such as thick paper or newspaper. This is done so that the light does not disturb you.
You have already measured the distance, let’s move on to making the telescope tube itself. To make it, it is best to take whatman paper or any other thick paper. We also need a plastic or wooden tube of the appropriate diameter.
Now we take the paper and wrap it around our rod, coating each layer well with glue. Make sure the edges are even. As soon as the glue dries, we insert our eyepieces into it, and the additional one should be installed so that when moving along the pipe there is a slight friction to focus.
Important: The greater the distance between the eyepieces, the greater the magnification and the worse the image quality. Therefore, be careful if you do not want your telescope to produce strong power.
Our binocular telescope is ready for use for its intended purpose. Just never point it at the sun, otherwise it can cause a severe burn to the retina, which can lead to blindness.
Advantages of the telescope
— You will never be able to buy such a telescope in an online store or in a retail store. Therefore, having made such a telescope for yourself, it automatically becomes exclusive of its kind.
— A new telescope is very expensive. Therefore, it’s easier to buy inexpensive binoculars and do everything yourself.
- From now on, you will be able to observe the night sky, and the number of stars will quite surprise you, since there are much more of them than when we look at the sky on an ordinary evening.
— The moon will appear before you in all its glory. Now you can see its surface and relief.
This is not all the advantages of a homemade telescope. The rest you can discover for yourself when you start using it.
You can change some details at your own discretion. In this case, ingenuity and imagination are important. We hope that our tips will help you create your next masterpiece.
Loading...